PrintaMent line deliver a high quality product produced in europe with minimal tolerances for the diameter of the filament with a very tight diameter and roundness tolerance. Most materials offer a colourful selection of many beautiful colours which gives you a lot of options to perfect and individualize prints.
PrintaMent is available in the diameters 1.75mm and 2.85mm, weight 750g and comes on a transparent spool which makes it easy to see how much filament is left on the reel.
Universal material: PLA, M-ABS, PET-G
PLA – everyday filament
PLA (Polylactic acid) is a biodegradable 3D Print material which is non-toxic and develops no unpleasant smell during printing. PrintaMent is produced from high quality raw materials and well matched additives that result in a good interlayer adhesion, low shrinkage and a good adhesion to the printbed. The formulation also makes the filament less prone to absorbing moister. PrintaMent PLA is easy to use in all FDM/FFF printers and has a slight shine to its appearance when the print is done.
PrintaMent PLA works perfect with PrintaFix on an unheated or heated printbed.
PrintaMent PLA glow in the dark – is abrasive to nozzles – we advise to use hardend nozzles to print this color.
|Printing T||Bed Temperature||Printing Speed||Fan Speed 2nd Layer|
|BCN3D Sigma||195°-220°C||off* | >65°C||Up to 70 mm/s||100%|
|Ultimaker 2||195°-220°C||off* | >65°C||Up to 80 mm/s||100%|
|Ultimaker 2+||195°-220°C||off* | >65°C||Up to 80 mm/s||100%|
|Ultimaker 3||195°-220°C||off* | >65°C||Up to 80 mm/s||100%|
|BQ Wittbox 1||190°-215°C||n.A.*||Up to 60 mm/s||100%|
|BQ Wittbox 2||190°-215°C||n.A.*||Up to 60 mm/s||100%|
|BQ Hephestos||190°-215°C||n.A.*||Up to 60 mm/s||100%|
|Prusa i3||190°-215°C||off* | >65°C||Up to 60 mm/s||100%|
|Prusa i3 MK2||190°-215°C||off* | >65°C||Up to 60 mm/s||100%|